Rail

From climatic to mechanical environmental simulation tests Phoenix Testlab has one of the best equipped laboratories for the railway sector.

Climatic tests in the range from - 50 ° C to 180 ° C, with or without humidity option, with a test room volume of 0.5 m³ up to 24 m³ and vibration tests up to a total weight of max. 2t, e.g. Control cabinets, air conditioning units or printers are marginal values of our possibilities. We also offer our services in the field from the creation of fixtures through construction to the adaptation of your products with our test systems.

Accreditation/certification

Accreditations: DIN EN ISO/IEC 17025:2018
Certifications: DIN EN ISO 9001:2015 and DIN EN ISO 14001:2015
Accredited for tests on electronic components for railway applications

Typical Standards for the applications listed above
  • DIN EN 50155 railway applications
  • DIN EN 61373 vibration tests for railway applications
Basic standards
  • DIN EN 60068-2-6 (sine vibration test)
  • DIN EN 60068-2-2 (climatic test)
  • DIN EN 60068-2-14 (rapid change in temperature)
Environmental simulationd laboratory equipment

  • Temperature and humidity cabinets up to 24 m³
  • Air pressure chamber with negative pressure up to 200 mbar
  • Electrodynamic vibration test systems up to 300kN (option: with temperature / humidity overlay)
  • IP water test equipment (dropping, splashing, immersion)
  • Salt fog chambers up to 11 m³
  • Flammability test facility

Monitoring systems

  • For controlling and monitoring of test samples e.g. resistance-monitoring by micro-cut, automatic button-pushing systems, electrical charging & loading systems
  • Standardized measurement procedures for recording analog measurements
  • Automatic optical monitoring systems
  • Monitoring of digital signals e.g. CAN, LIN, Ethernet, RS232
  • Simulator of GPS signal